Reply to thread

Message: <blockquote data-quote="Kansas66" data-source="post: 107369" data-attributes="member: 17598"><p>Thank you for the reply, I really appreciate it. Thought you might be onto something with the float too low, so I went out to work on it, and think I may have stumbled on the issue through elimination. The engine seemed to be running on both cylinders, but I don't have a lot of experience with Onan's to be able to audibly notice something wrong. I pulled one spark plug wire, and the engine wouldn't start with the remaining cylinder. So I reversed the procedure, and it started. I thought maybe it was a bad plug, so I swapped the plugs. The problem didn't follow the plug. Pulling the wire on the weak cylinder while it is running makes an audible difference, almost seems like something is going on in there, but whatever it is its really weak. Guess m going to have to be tearing into the engine to see if its valve adjustment related or just doing a repower with a 22hp Predator or something. Sorry the formatting on this is hard to read, not sure how to insert breaks.</p></blockquote><p></p>