I need two new Tilt cylinders for s205 bobcat

[silverram323]

I had one cylinder leaking a little, and one started gushing, took them off and looked them over and i found the rods to be bent. I then brought them to a shop to get to see if i can get new rods made, but they also found that the end caps are shot as they are egg shaped from the bent rods so the new seals wont do any good. The shop wants $1250 to rebuild the cylinders and then i new two new caps (threaded head where the oil scraper is) $275 ($137.50 Each) from bobcat. Well bobcat wants $1100 for one complete cylinder, and http://xtremecylinders.com/hydraulic-cylinders/bobcat-hydraulic-cylinders/bobcat-hydraulic-cylinder-s185-s205-t190-tilt-cylinder/41806/ wants $785 each, Is there anywhere that sells Good used cylinders or new that is cheaper then what i have found? This cylinder fits these models. 773, S150, S160, S175, S185, S205, T180, T190

 

[rnbuck01]

How bad is the cylinder rod bent? Is it $1250 for the complete rebuilt cylinders?

 

[mmsllc]

How bad is the cylinder rod bent? Is it $1250 for the complete rebuilt cylinders?

I have two sets off of a 873. I think they might leak a little, but should rebuild just fine. Let me know / make reasonable offer, if you are interested. Thx.