wateka
Well-known member
- Joined
- May 25, 2022
- Messages
- 124
Attached is the manual needed, plus the above OneDrive link has pictures I took overhauling my Char-Lynn 114-1064-005.
Also attached is the Danfoss Char-Lynn parts manual that has much better drawings. As you will see, the Danfoss PDF includes variations not used by Bobcat models.
The Char-Lynn/Danfoss/Eaton seal kit needed is 61239
It's not a terribly difficult job.
Mine came out of my 853, and the manual says these are also used in:
730, 731, 732, 741, 742, 743
742B & 743B (S/N 17999 & Below)
7753 (Early Models}
843, 853, 1213