Hawkdriver
New member
- Joined
- Aug 19, 2014
- Messages
- 3
I have a 2002 40XT 3581 hrs, that just stops when under a load and both control arms are being used. I pushed against a tree to test what is happening. When you push both control arms forward against a tree, the tires will not spin or even attempt to spin. If you push only the right control arm forward, the right side will spin like crazy. If you push only the left control arm the left side will spin but not near the speed the right side will. If you push both at the same time nothing, neither side will spin. There is no unusual noise from the tandem/drive motor pump area when the machine stalls, it just refuses to push hard when both control arms are being used. It does this both in forward and reverse. Does this sound like a drive motor only issue, or a drive motor/ tandem pump issue? Thank you