MikeLawrence
New member
- Joined
- Aug 23, 2023
- Messages
- 3
I have a BC 743b and one of the lift arms is leaking oil at the connector at the front of the cylinder. It is close to the cylinder wall where the connector appears to be welded to the cylinder.
Both cylinders are mounted with the connectors pointed down toward the ground. The one leaking appears to be bent probably from something getting between it and the frame.
The pics I see of 743b's show the cylinders mounted with the connectors upwards. Can they be mounted either way?
Is that connector welded in?
Can it be welded if I remove all the guts first?
Or do I have to buy an new cylinder?
Thanks for any help.
Mike
Both cylinders are mounted with the connectors pointed down toward the ground. The one leaking appears to be bent probably from something getting between it and the frame.
The pics I see of 743b's show the cylinders mounted with the connectors upwards. Can they be mounted either way?
Is that connector welded in?
Can it be welded if I remove all the guts first?
Or do I have to buy an new cylinder?
Thanks for any help.
Mike