Thanks. I flushed the tank before I put the charge pump on. Will flush it again just to make sure. You guys that work on these things day in and out. I give you props. You deserve 50 an hr.
Alright. Thank you. I agree with you. Most people use a machine to flush systems. This setup works wonders but lacking volume on this application. Solvent and air at 160psi pounded through multiple times until the system is clean. I've done about 5 flush bombs thus far.metal is still coming. In...
I agree. Would you install additional filters? If so where would you reccomend? I pulled the cooler this am. Gonna try flushing it. Dad owns a transmission shop and has a home made bomb for flushing coolers. Should work. If not a new one it will be. As far as the wheel motors I feel they can be...
Hey bobcatdan. Main concerns were metal and getting the system clean. The charge pump piled up and took out the drive pump. And ran until it wouldn't run or move anymore. (Bought it like this so I only know what I am told and can see). And you can't believe anything you hear and half of what you...
I just found these now. Thanks for posting tazza. Drive motors look decent in my mind. I will send you some pictures of the, tomorrow. Maybe tell me what you think. Spent most of the night washing the undercarriage and back flushing all the lines with solevent. I'd like to try and push some snow...
I've posted a few times trying to trouble shoot the hyd system. Symptoms were. No tilt no lift. Minimal drive on the left side and no drive on the right side. With the extremely low charge pressure code. Put a new charge pump on with no positive effect. And it begins. Gutted the hyd system...
Thanks tazza. Both valve plates need to be changed for sure. It's cut in deeper then the brass. As for the rotating group assembly I wonder if it can't be cleaned up. I've taken some pictures. Just not sure how to load them. I am also wondering if there is clearances that need to be met when...
Thanks for the advice. I decided yesterday to gut the hydraulic system and go through everything. I am trying to track down parts so I can rebuild the hydro pump. Any good sources to buy the valve plates from? Who actually makes these pumps?
I did get the machine cheap. I don't believe it needs new everything. It's not a 2 spd model. I do have a line on a lightly burnt 220 with 2spd pumps. Would this work if no one chimes in with any ideas. I am gonna start pulling pumps. My dads been owner operator of a tramsmission business for 28...
This is bobcats service invoice. Diagnose and repair code 05-15/ inspect driveline noise The machine arrived with a service code of 05-15 and to also inspect the machine for a driveline noise. We scanned the machine to find the code is a low charge pressure code. We then performed a test on the...