Recent content by Heatmaker

Thank you for your input Farm.. In the past, you have always steered me in the right direction.. Is the cable hard to replace on the 2044

Hey guys, I have a quick question for you. When it is cold out, My curl pedal locks up, and doesn't move in either direction( it makes it hard to to move snow) I have to put a heat gun under the floor board for 15 minutes and it works normal.. Any Ideas??

Thanks Farm for all your input.. Well I narrowed it down to an electrical problem.. I wired the solenoids direct to the key switch, with a in line 15 amp fuse to each of them

I just pulled all the ground wires, cleaned up where its ground to on the machine. I disconnected the linkage on the tilt valve, and the pedal moves freely. I also jumped the emergency switch and nothing worked as of yet,, I cant find any chaffing or breaks in the wires.. Do you know if I should...

Farm, is the lock solenoid on the valves for lift, tilt, aux.where the hot, and ground wire goes to. I was going to try to just cut them out, but didn't want to open a can of worms

Thanks Farmshop, It has to be one of the wires.. I separated them yesterday and it worked perfect. I appreciate your input

The parking brake does unlock. The loader bucket is my only problem. I am going to chase the wires back from each solenoid today to check for any chaffing or breaks. Also, Mine is grounded to the machine and I will double check that.. Do you know what I should get for a reading when I put a volt...

Still having problem?? Any ideas where I can start to troubleshoot

Having problems tilting and lifting loader bucket.. The bucket goes up and down when I press the emergency button. I went to the back of the machine today, and disconnected the little electrical connection to the valves and reconnected them, I went back into the machine, and heard a click when...

Thanks Jerry, parts are on order.

Hi guys, I just picked up a 98 Lx485, and I am looking for the two shock stabilizers for the steering, Can someone let me know what the part numbers are or tell me a web site where they can be found??