Recent content by genco

NEW. never used Bobcat Lexan forestry door. Bought for a Bobcat T320 but I'm sure it will fit other machines. 3/4" thick. Has the quick release hinges. $3500.00

I am looking for a 5 ton excavator. Prefer a Bobcat E50 but will look at others. Must have enclosed cab with heat/ac. Must have low hours [under 500] and be reasonably priced. Email to [email protected]

Cutter is SOLD

Door has been sold. Will take $15,000 for cutter.

Door is SOLD

I have a 60" forestry cutter for sale with about 20 hours run time on it. Cutter is in excellent condition and has the front gate with the hydraulics to open and close it. Cutter is as close to new as can be and I will include the $4500.00 safety door for the Bobcat. I will take $16,000.00 for...

OR BEST OFFER

Bobcat forestry package 3/4" safety door. Came off of a Bobcat T320. I'm sure it will fit other size Bobcats as well. Has been ran on machine for about 20 hours. Has the wiring harness to operate a forestry cutter. I am told this door is $4500.00 new from the Bobcat dealer and i will take...

Ivan you are great. Thank you very much. Ron

Ivan, This is the very bottom tube type weldment down below the lift cylinders. These run to the back of the machine and have a tube going across behind the machine. The bucket tilt hoses run thru the left side tube. I need the center of pin to center of pin measurement that appears to be around...

Ivan, I don't know how to post pictures here but what I need is if you look at the side of your machine the linkage that the hoses run thru going to the lift arms is what is missing from this machine. This linkage pins onto the frame on each side just below where the lift arm cylinders pin on...

Ivan, Thank you for your help. I will get a picture tomorrow and attemp to post it. Ron

I am working on a 553 for a friend and need to try to get someone with a 553 to take a measurement for me. The lower lift arm linkage are missing from my friends machine. I would greatly appreciate it if someone would take a minute to measure the length from center of pin to center of pin on the...

I can't beleive that nobody has used one of these mulching heads. I guess they are not used as much as I thought.

Please send some pictures and provide serial# to [email protected] . Thanks