Recent content by flathead

Bobcat. Any G series machine. I was a field tech at a dealer for a number of years, those are by far number one.👌

Just make darn sure you keep those lower pin bolts TIGHT, like check them twice a day for the first little while and periodically thereafter, also grease them twice a day with the lower tilt cyl bushings when operating in dirty conditions. I ran a shop at a bobcat rental store and noticed a huge...

The lower tilt cyl bushing is pressed in....... not welded.. i was a bobcat tech for 8 yrs, it is a hardened steel bushing, so you cannot use a brass punch :( there is a stepped tool ive always used for removal and installaton, if you can find a pin the same diameter as the outside of the...

Tazza there is a bleed valve in the fuel filter housing. And yes by all means gasoline mixed in with the diesel fuel will cause this same symptom, ive seen it happen many times, like tazza said bypass the fuel in the tank and try runnin it off of fresh fuel from a jerry can :)

Do you have any codes? Check them by pressing and holding the headlamp button, if any they are explained in the little book behind the seat by your right shoulder, also I assume you are pressing the activation button for the aux hyd? :)