Recent content by Dhandy

sounds like you have aq sticky or bad relay that is not shuting down , also I would check the wiring and make sure there is not a drict short to power. put I would think the relay would more likely be the fix

stop by the auto Store on my way home and picked up 3 fuel filters. I removed the fuel filter and installed the new fuel filter I pored fuel in the new filter before I installed it pump the primer ball and opened the bleeder screw shut the bleeder and pump up one more time and bleed system...

Thanks for your help I call Ford or New Holland and they told me that there fluid was not rated for the bobcat so I will flush the system. The hydra fluid was only in for like 7 hours of run time. So I think I will go with the 10w40 would a 30w work or a 15w 40

I just recently blow a hose on my right hydr motors .I replaced the hose and put hydrolic fluid in the Hydraulic system .Now I find out that it uses motor oil . I have put about 5 hours on it since I put the Hydraulic oil in the system. Question is do I need to remove this and put motor oil in...