bought all new seals for drive motor because it was leaking hydro oil in my chain case filling it all the way up. when i rebuilt it it is not leaking where the blue motor meets up against the yellow section which is where the main bearing carrier seal is i guess to keep the oil from leaking in...
I notice my hydraulic fluid is pouring out my oil filler neck on the left side of the machine. The machine will not move at all and the second i fill it with hydro fluid it is gone. Can somebody tell me what is going on? My guess is my motor carrier seals are bad and this is why i have hydraulic...
can anybody tell me where i can get parts for this. I've tried calling everybody and nobody seems to know. I'm told Doosan bought out deawoo and bobcat years ago and that most of the 96 bobcat 753 parts will fit.
one of the cylinders that tilts my bucket back has a slow leak. It seems to be slow but its enough to rub a decent amount off on your finger after using it and the rod is wet too, not dry like the other. I would say the amount that comes off on your finger is like a bad runny nose when you wipe...
It is a 1997 daewoo dsl 601. I did look at the lock down handles and as you said the do extend down to the bottom where it goes through a square hole but this is a lot of play around it, not a tight fit therefore the bucket slams if i not to careful
wow, 197 views and no one response. The manuals don't say, trust me as i read through all them. I posted a question like this and still waiting for someone to come along who knows.
gotcha, i'll take a look at that today. What is the purpose of the bolts you see there with the jam nuts. Looks like some sort of adjustment for something.
the bottom of my bucket slaps against the bottom of my quick tach i guess you would call it when i come up too fast. Is there a way to secure the bottom of the bucket so it does not do this. the top is fine obviously because I lock he quick tach system by pushing down the handles. looks like...
I'm trying to find out what type of engine oil a 1997 Deawoo dsl 601 takes. I have the operation and maintenance manual and it is not listed in the book also would like to know what type of hydraulic oil & engine cooling solution. not sure if it just takes a 50/50 solution of antifreeze thanks