Recent content by Apakesha

I am working on a Bobcat 773, trying to adjust the steering linkage and neutral settings. I have the Bobcat up on blocks and can hold down the lap arm locks and the machine will start. I hit the lock override button and the wheels will turn. When I lift the seat and cage, it will still run...

Success::::::: Finally got it fixed. I did everything that I possibly could think of. Watched hour and hours of youtube videos. Spent days removing check valves, testing solenoids, removing solenoid posts etc. etc. etc. About drove me nuts.... Adjusted the left pedal. That was it...

When I get the lift pedal to raise the bucket I just barely crack the tilt pedal in the up position. That lets the lift go up fast. Another thing that I discovered is this machine has an auxiliary button on the dash. When I push that button it activates the auxiliary system. If I raise the...

My friend brought me his skid steer loader giving me the opportunity to solve his problem. When I got it, the lift would go up and down with no problem. So I asked him to bring a bucket to try to replicate the problem under actual conditions. I got it attached and had no problem raising and...

Started bobcat and had good lift. Lifted back of Pickup truck off of ground for a couple of times with resounding power. Then it started lifting real slow. Checked tilt up and down with no problems. The lift goes down real good too. With tilt down the lift also goes down with good power...

I am working on a Bobcat S650 and the machine will not lift a load when the machine is at idle. If I increase rpms it will lift. It originally did not do this. Any suggestions?