New to the skid steer forum. But I came here bc I seen alot of info on here and hoping for some help. I have a 2004ish 250 John deere 250 skid steer that I'm having some issues with. Backstory I lost a hose and emptied all the hydro out while operating it. I replaced hose and bleed the system and was able to finish the job, but next day came out and it would lift bucket and tilt fine when cold. As soon as I get operating it quits lifting the bucket and very slow to tilt. It comes down fine after it is raised. So I took the bucket off and tried it without anything on boom and it works fine up down and tilt. I'm trying to get ideas on what could be wrong and what to check. I'm pretty mechanically inclined but this has got me stumped. Side note I did find a lockout solenoid wire was pretty much cut in half so I am replacing it and have it on way. Any help I'd really appreciate it.
