universal skid steer mounting plate drawing

Help Support SkidSteer Forum:

Scubasteve

Member
Joined
Dec 21, 2011
Messages
14
Here is a Universal skid steer mounting plate I drew in autocad this morning. I saved it in pdf so y'all can view it. I even detailed the parts. you can substitute the 1/4" plate with 3/8" ect. If you dont have access to a break you can cut the break line and weld on at 45 deg. I have seen this question asked so here y'all go. Hope it helps. http://www.filedropper.com/universalskidsteerattachmentplate1-model
file storage
 
Top