Hi guys, I am lost on my two speed adjustment. My right side motor had a plate attached to allow adjustment of the two speed setting. When I pulled my engine out I notice the lever on the motor was off and the bolt that rides in like a 90 degree cutout was loose. I don't know what the original setting was because the bolt was loose. I have a 720 service manual, but it only seems to address the linkage to the two speed bellcrank - not the adjustable plate from the right side to left side motor. Any ideas? It will likely be hard to adjust once the engine is installed, so I hope to get it right now... Thanks, Bobcat 720
