Traction Lock Solenoid (Where is it located?)

Help Support SkidSteer Forum:

tthams

New member
Joined
Sep 3, 2019
Messages
2
Hello and thanks to anyone that can provide insight on where I can locate the traction lock (parking lock) solenoid on a 2007 Bobcat S250? After searching the Internet it seems it is located in different locations on different models. I was told on the S250 that it is located behind the fuse panel under the cage where the feet rest. I can't seem to locate it. Am I looking in the correct location? Is there a side panel I have to take off to locate it? Thanks in advance for anyone's help that can help point me in the right direction.
 

farmshop

Well-known member
Joined
Mar 27, 2014
Messages
698
Most bobcats its under the cab mounted vertically in the center of the front axle. Three wires with a flat plug a little smaller around than a soda can
 
OP
OP
T

tthams

New member
Joined
Sep 3, 2019
Messages
2
Most bobcats its under the cab mounted vertically in the center of the front axle. Three wires with a flat plug a little smaller around than a soda can
Thanks for the input. I looked for it last night, and there it was looking right back at me. Thanks again!
 
Top