Takeuchi TL10 Stuck Hydraulic

Help Support SkidSteer Forum:

a1970gt6

New member
Joined
Dec 9, 2018
Messages
2
Hey I'm new to skid steers. Not a professional. I recently purchased a 2016 TL10. The hydraulics have not been used. Only the bucket. I had trouble hooking up the brush cutter to the aux. The face of the couplers were kinda corroded. I was finally able to push in the hoses. When I tried unhooking, the closing part didn't pop out to shut off the flow. It is stuck. Any advise.
 

flyerdan

Well-known member
Joined
Mar 7, 2009
Messages
983
You might be able to free it up with something like a flat faced punch working the inner section a bit at a time until it frees up, but it would be better to take them apart and burnish all the corrosion off with something like a wire brush on a dremel tool.
 

Latest posts

Top