T-250 error code 16-07

Help Support SkidSteer Forum:

hollywoodmatty

New member
Joined
Jan 18, 2013
Messages
2
Trying to find the cause of this error code as 5.51 v is present at coil and all wires to coil have continuity as well as wiring to parking brake switch. Traction lock override will not work and light for lock flashes constantly, also tested wires from relay to module and from module to switch and from coil to module repaired several wire rubs but cant find an open that the error code indicates..........HELP!
 
OP
OP
H

hollywoodmatty

New member
Joined
Jan 18, 2013
Messages
2
traction lock hold solinoid open curcuit
Just wondering if anyone has any ideas of a problem area for opens in the harness, the harness in this machine has at least a dozen wires with significant rubs through the insulation. Even after repairing these none have fixed the traction lock hold circuit, just FISHING for ideas.......
 

Fishfiles

Well-known member
Joined
Feb 8, 2007
Messages
1,698
Just wondering if anyone has any ideas of a problem area for opens in the harness, the harness in this machine has at least a dozen wires with significant rubs through the insulation. Even after repairing these none have fixed the traction lock hold circuit, just FISHING for ideas.......
it could be the solinoid itself is bad , it will throw that code if it is bad ------
 
Top