skidsteer.ca - any suggestions for me?

[T man]

You really seem to know your stuff from what i've been reading. Does Err 2 on the EIC mean anything to you. I posted this question in another thread, didn't know if you had seen it or not. The machine is a 1998 NH LX865. Thanks in advance!

 

[T man]

Didn't mean to leave anyone out. By all means if ANYONE has help or suggestions I'll gladly take it!

 

[skidsteer.ca]

Sorry I only have the owners manual and the LS 160 /170 engine manual Section 10
Neither of which covers EIC codes
Section 55 covers the electrical, which may be the same as the earlier LX series.
I'll see if I can find something out. Charger was good enough to fax me a whole bunch of info when I put in my Hi flow, but it took a few days.
I see if I can get a list and put it up here. That should be in the owners manual.
Ken

 

[mllud]

Sorry I only have the owners manual and the LS 160 /170 engine manual Section 10
Neither of which covers EIC codes
Section 55 covers the electrical, which may be the same as the earlier LX series.
I'll see if I can find something out. Charger was good enough to fax me a whole bunch of info when I put in my Hi flow, but it took a few days.
I see if I can get a list and put it up here. That should be in the owners manual.
Ken

New Holland has several manuals for each machine. Some cover more than one machine. I have the Operators Manual and the Engine Manual. I know there is a seperate manual for the hydraulic system. I believe there is a seperate Manual that covers Electrical. The owners Manual covers a little of everything but the individual manuals have a lot more detailed info. Here is the number to order ihe manuals. 1800 635 4913. I got this number from a decal in the cab of my lx865. its above the seat to the left.I ordered my owners manual for around 45$ The engine manual was 75$. I hope to get the full set eventually. If you ever need any info out of the engine manual let me know. Mike

 

[skidsteer.ca]

New Holland has several manuals for each machine. Some cover more than one machine. I have the Operators Manual and the Engine Manual. I know there is a seperate manual for the hydraulic system. I believe there is a seperate Manual that covers Electrical. The owners Manual covers a little of everything but the individual manuals have a lot more detailed info. Here is the number to order ihe manuals. 1800 635 4913. I got this number from a decal in the cab of my lx865. its above the seat to the left.I ordered my owners manual for around 45$ The engine manual was 75$. I hope to get the full set eventually. If you ever need any info out of the engine manual let me know. Mike

I Pm'd Charger on another site I know he frequents and put in a request. I let you know if he gets back to me. I going to have to buy him some beer the next time I go by his way. He faxed me about 75 pages on the hi flow thing. So let hope he has a bit of free time.
Ken

 

[T man]

I Pm'd Charger on another site I know he frequents and put in a request. I let you know if he gets back to me. I going to have to buy him some beer the next time I go by his way. He faxed me about 75 pages on the hi flow thing. So let hope he has a bit of free time.
Ken

Thanks folks I really appreciate the help. I will hopefully get to start tracing wires today. It sure would be nice to find a wire disconnected and simply plug it back in. But thats never my luck. Thanks again!