Forums
New posts
Search forums
What's new
New posts
New media
New media comments
New profile posts
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Bobcat Skidsteer Forums
General Bobcat Skidsteer Forum
Salvage value for a 743B
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support SkidSteer Forum:
Message
<blockquote data-quote="Tazza" data-source="post: 9980" data-attributes="member: 82"><p>HE HE</p><p>Well, if there is no key, thats not a big deal, you can easily hot wire it.</p><p>The 743B should have an electric shut down solenoid, you may need to hold the lever in place with say a rubber band or wedge something in there to hold the stop lever in the run position.</p><p>With that sorted, hook one end of the jumping cable to the glow plug rail and connect the other to the +ve battery terminal. With that in place let it warm for say 15-20 seconds and use a screwdriver to bridge the small connector on the starter to the +ve cable just above it. You will see a small wire attached to this terminal. It should burst into life. When its running remove the cable to the battery and glow plug rail.</p><p>I have started mine like this a few times when i still hadn't hooked up the wirng harness. Just don't leave the glow plugs running too long. No more than say 60 seconds. It should only need a max of 30 to start depending in the temperature outside.</p><p>If you need more info just yell! i know far too much about 743's.......</p></blockquote><p></p>
[QUOTE="Tazza, post: 9980, member: 82"] HE HE Well, if there is no key, thats not a big deal, you can easily hot wire it. The 743B should have an electric shut down solenoid, you may need to hold the lever in place with say a rubber band or wedge something in there to hold the stop lever in the run position. With that sorted, hook one end of the jumping cable to the glow plug rail and connect the other to the +ve battery terminal. With that in place let it warm for say 15-20 seconds and use a screwdriver to bridge the small connector on the starter to the +ve cable just above it. You will see a small wire attached to this terminal. It should burst into life. When its running remove the cable to the battery and glow plug rail. I have started mine like this a few times when i still hadn't hooked up the wirng harness. Just don't leave the glow plugs running too long. No more than say 60 seconds. It should only need a max of 30 to start depending in the temperature outside. If you need more info just yell! i know far too much about 743's....... [/QUOTE]
Verification
Post reply
Forums
Bobcat Skidsteer Forums
General Bobcat Skidsteer Forum
Salvage value for a 743B
Top