s175 electric problem

Help Support SkidSteer Forum:

mtalonm

New member
Joined
Sep 18, 2015
Messages
2
So the bucket stopped moving. After some time of frustration and searching forums I found that it could be a fuse. The fuse for switched attachments. Replaced it and it worked fine. After two weeks it blew again. When i tried to replace it the second time, it blew at contact. So i'm guessing there is a constant short somewhere. I followed a huge bundle of wires coming from the fuse box, but couldn't find any visible wire damages or shorts. Do you guys have an idea what and where the problem is? Thanks in advance.
 

Bobcatdan

Well-known member
Joined
May 3, 2012
Messages
1,684
Any service codes? Which fuse is blowing, attachments or unswitched? If you have a 7 pin attachment harness, that's probably smashed and causing your problem.
 
OP
OP
M

mtalonm

New member
Joined
Sep 18, 2015
Messages
2
Any service codes? Which fuse is blowing, attachments or unswitched? If you have a 7 pin attachment harness, that's probably smashed and causing your problem.
Ok, Found a wire with damaged isolation. Fixed it. The fuse doesn't blow anymore. But the hydraulic system doesn't engage.
 
Top