Prime Mover L1300 A Work In Progress

Help Support SkidSteer Forum:

OP
OP
J

j.carter855

Member
Joined
Feb 14, 2011
Messages
16
Yeah, that could cause a problem on two........
ok dad got the engine out & turned around. Nothing... removed it again & put it in the original position - seems to be running well. Now he has to get throttle and a couple other things worked out to control them from the cab. Not pretty but it works & thats all that really matters ;) Thanks for all the help guy's
 

Tazza

Moderator
Staff member
Joined
Dec 7, 2004
Messages
16,836
ok dad got the engine out & turned around. Nothing... removed it again & put it in the original position - seems to be running well. Now he has to get throttle and a couple other things worked out to control them from the cab. Not pretty but it works & thats all that really matters ;) Thanks for all the help guy's
Progress is still progress!
Keep up the good work.
 

bilmar

New member
Joined
Aug 12, 2011
Messages
3
Progress is still progress!
Keep up the good work.
I have a prime mover L1300 and the left side will not move unless the motor is wide open. I have install a new charge pump,Had the hydrostat rebuilt, and installed a new left side drive motor but still will not move on the right side. When i speed the motor up i get a loud buzzing sound. ANY SUGGESTIONS?
 
Top