older 943 problems

Help Support SkidSteer Forum:

PO3.632

Member
Joined
Nov 22, 2012
Messages
5
I have just totally refab this 943. looked liked a farmer nitemare. It drivers and runs good. The arms and bucket will not work. I think its the third valve . But i have found some extra valve boxes in this beast.
 

SkidRoe

Well-known member
Joined
Dec 10, 2009
Messages
1,885
Are the aux hydraulics stuck on? On other X43 series machines (i.e. 743, 843, etc.), you would move the right stick all the way to the left, then let go of it for it to find neutral. Not sure that would work on a 943, but maybe worth a try. HTH.
 

Fishfiles

Well-known member
Joined
Feb 8, 2007
Messages
1,698
Are the aux hydraulics stuck on? On other X43 series machines (i.e. 743, 843, etc.), you would move the right stick all the way to the left, then let go of it for it to find neutral. Not sure that would work on a 943, but maybe worth a try. HTH.
most probally the gear pump is worn out , do a pressure /flow test at the quick couplers
 
Top