Forums
New posts
Search forums
What's new
New posts
New media
New media comments
New profile posts
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
General Skidsteer & Technical Topics
Attachments
I just finished building my 72" brush/tree mower >>>>>
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support SkidSteer Forum:
Message
<blockquote data-quote="RS Coyote" data-source="post: 2324" data-attributes="member: 175"><p>Find a Brush Wolf dealer and order the the Motor, coupler, Gearbox, & blade assembly through them. I did a lot of research before I bought the components. Basically you get what you pay for and they already have a good system. I just did not like their deck & saved a few bucks building my own. I have found that Brush Wolf has a heavier set up than what you find on farm brush cutters. The blades cost a few hundred dollars IIRC. But I have been welding the edge back on them to keep them sharp. I have a 863 HF machine and @ full throttle and in HF the blades turn about 1400 RPM & 1000rpm in standard flow. I have cut down and mulched 5-6" trees.</p><p>I used 8" channel for the side rails, 1/4' for the top sheet, 1/2" plate to bolt the motor and gear box to, & 3" channel for reinforcement across the top.</p></blockquote><p></p>
[QUOTE="RS Coyote, post: 2324, member: 175"] Find a Brush Wolf dealer and order the the Motor, coupler, Gearbox, & blade assembly through them. I did a lot of research before I bought the components. Basically you get what you pay for and they already have a good system. I just did not like their deck & saved a few bucks building my own. I have found that Brush Wolf has a heavier set up than what you find on farm brush cutters. The blades cost a few hundred dollars IIRC. But I have been welding the edge back on them to keep them sharp. I have a 863 HF machine and @ full throttle and in HF the blades turn about 1400 RPM & 1000rpm in standard flow. I have cut down and mulched 5-6” trees. I used 8“ channel for the side rails, 1/4' for the top sheet, 1/2“ plate to bolt the motor and gear box to, & 3“ channel for reinforcement across the top. [/QUOTE]
Verification
Post reply
Forums
General Skidsteer & Technical Topics
Attachments
I just finished building my 72" brush/tree mower >>>>>
Top