I posted a question on my Toyota SDK7 skid steer in Nov in the other forums and got no hits so I hope I'm not in trouble by jumping lines but here we go My machine starts and runs fine working, moving or sitting and idling for about 5 minutes then she loads up like 2 pumps lever or a stick or pedal is pressed to the point she stalls. She seems to start right back up but lurches forward and right until I pull the stick back to settle her down but then again stalls do to unknown pump pressure. My guess is a pressure release valve sticking but not totally sure. And it's location is also a mystery. Any help would be appreciated.
Help Support SkidSteer Forum:
brdgbldr
Well-known member
- Joined
- Jun 1, 2012
- Messages
- 1,190
Not familiar with this machine but I'll put in my 2 cents.
Sounds like you're on the right path with the relief valve but it could also be a clogged up filter. Most all hydrostatic systems have a brass filter in them.
With the lurching, you may also want to check and make sure other valves are not sticking.
Sounds like you're on the right path with the relief valve but it could also be a clogged up filter. Most all hydrostatic systems have a brass filter in them.
With the lurching, you may also want to check and make sure other valves are not sticking.
