Thanks Fish, I called John at Construction Tool Parts. He told me about the Tramac deal and got me the part number for the o-ring that is missing from my kit. I called my sister dealership that is a Tramac dealer to find out the o-ring in question is $30 something dollars each. I need 8 of them. This sucks.That hammer was a Tramax , I think the BRP or BRH-9598 is the same , becareful as there was a problem with some of the Bobcat complete seal kits for that hammer , where they were missing orings from the kit and there were no part numbers next to the reference number on the part break down so they couldn't get them , a Tramax dealer was able get and sell indivual parts , what I would do is get a fax of the Bobcat/ Ingersol Ryan 980 and the Tramax and compare the two , and call A T @ 1800-447-1053 and ask them , they are a Tramax dealer --other opition is take the old seals if in good enough shape to match up to a hydraulic supply company
$30 each are you kidding me? take your old one to your local seal shop see if they can match it. Surly you can get it cheaper....Thanks Fish, I called John at Construction Tool Parts. He told me about the Tramac deal and got me the part number for the o-ring that is missing from my kit. I called my sister dealership that is a Tramac dealer to find out the o-ring in question is $30 something dollars each. I need 8 of them. This sucks.
John at Construction Tool is very nice and really knows his stuff , CPT don't do Tramax , I bull shooted with John day before yesterday , I am surprized he didn't tell you about A T , I'd also Dave with Midco Sling$30 each are you kidding me? take your old one to your local seal shop see if they can match it. Surly you can get it cheaper....