Gehl 2500 axle sprocket wanted

Help Support SkidSteer Forum:

leeconcrete

Member
Joined
Jul 22, 2009
Messages
11
Mine is a 21 spline with 32 teeth. Its right at 9 inches across. I need to find a good one the splines are stripped out on mine.
 
OP
OP
L

leeconcrete

Member
Joined
Jul 22, 2009
Messages
11
Sorry it has 36 teeth with 21 splines. Or has anyone ever heard of getting something like this re-splined? Or can buy a regular 60 chain sprocket and weld on some kind of hub that has 21 splines? Has anyone ever done something like this and where to start looking for hubs and sprocket? Any help is appriciated.Thanks
 

Don Shilling

Well-known member
Joined
Mar 29, 2011
Messages
56
Sorry it has 36 teeth with 21 splines. Or has anyone ever heard of getting something like this re-splined? Or can buy a regular 60 chain sprocket and weld on some kind of hub that has 21 splines? Has anyone ever done something like this and where to start looking for hubs and sprocket? Any help is appriciated.Thanks
I recently purchased a small sprocket and a hub to be welded together. Perhaps these folks may be able to help you. http://www.triplerinc.com/ Good Luck, Don
 
Top