Impact-vector
Well-known member
- Joined
- Aug 19, 2011
- Messages
- 66
I need some help figuring this thing out. My needle is pointed to 12 o clock. If I pry on the tensioner bracket, I get some tension. But the needle doesn't move. My tension is based on the bolt on the bracket. If I pry on the belt ( with the bolt tight) I get no movement of the needle At one point I took the tensioner apart, i couldn't decide if the spring was backwards. Anyways when I used the 2 pins to tension it i got the needle to move. But then I couldn't get the thrust washer on Can someone help me thru this? It shouldn't be this hard