Forums
New posts
Search forums
What's new
New posts
New media
New media comments
New profile posts
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Bobcat Skidsteer Forums
General Bobcat Skidsteer Forum
Bobcat 643 disconnect u-joint and buying manuals
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support SkidSteer Forum:
Message
<blockquote data-quote="Tazza" data-source="post: 10131" data-attributes="member: 82"><p>That is the new style.</p><p>I would give it a real good clean and see if you can spot the leak(s). The big hose at the top in picture 1 that is held with hose clamps, this is your main scution line. It appears you have a leak here that could be pulling air in! it could be as simple as tightning the hose clamps up.</p><p>Now, the other oil leak at the sender, i had a sender that did leak on me, it was only a dribble but it sure made a mess!!!. If its the sender thats leaking throw a new one at it to stop the leak. You will not draw in air from here though, this is under constant pressure, 90PSI or higher.</p><p>Start with that, and give it a real good clean! then you can spot where the oil is coming from if you have more leaks. If you can't get a sender straight away, you can plug this hole. I ran my machine for 2 years without the sender being even hooked up...... Not what i should have done, but it worked all the same.</p><p>As for the noise, its very common for the hydrostats to make noise when they are full of air, even a small amount will cause noise.</p><p>See how you go with that and let me know.</p></blockquote><p></p>
[QUOTE="Tazza, post: 10131, member: 82"] That is the new style. I would give it a real good clean and see if you can spot the leak(s). The big hose at the top in picture 1 that is held with hose clamps, this is your main scution line. It appears you have a leak here that could be pulling air in! it could be as simple as tightning the hose clamps up. Now, the other oil leak at the sender, i had a sender that did leak on me, it was only a dribble but it sure made a mess!!!. If its the sender thats leaking throw a new one at it to stop the leak. You will not draw in air from here though, this is under constant pressure, 90PSI or higher. Start with that, and give it a real good clean! then you can spot where the oil is coming from if you have more leaks. If you can't get a sender straight away, you can plug this hole. I ran my machine for 2 years without the sender being even hooked up...... Not what i should have done, but it worked all the same. As for the noise, its very common for the hydrostats to make noise when they are full of air, even a small amount will cause noise. See how you go with that and let me know. [/QUOTE]
Verification
Post reply
Forums
Bobcat Skidsteer Forums
General Bobcat Skidsteer Forum
Bobcat 643 disconnect u-joint and buying manuals
Top