Sep 6, 2007 #2 W Whitey Member Joined Jul 26, 2007 Messages 17 I replaced the drive gear in the starter today,now the engine wont turn over and there's no power to the ignition.
I replaced the drive gear in the starter today,now the engine wont turn over and there's no power to the ignition.
Sep 6, 2007 #3 F Fishfiles Well-known member Joined Feb 8, 2007 Messages 1,698 I'd guess you took off the starter to change the bendix , and probally didn't put the wires back on right on the starter
I'd guess you took off the starter to change the bendix , and probally didn't put the wires back on right on the starter
Sep 6, 2007 #4 T Tazza Moderator Staff member Joined Dec 7, 2004 Messages 16,835 Fishfiles said: I'd guess you took off the starter to change the bendix , and probally didn't put the wires back on right on the starter Click to expand... Could you have blown a fuse if there is no power? I'd start by running a wire direct from the solenoid on the starter to the +ve connection on the starter. The starter should spring to life. Hopefully its something simple.
Fishfiles said: I'd guess you took off the starter to change the bendix , and probally didn't put the wires back on right on the starter Click to expand... Could you have blown a fuse if there is no power? I'd start by running a wire direct from the solenoid on the starter to the +ve connection on the starter. The starter should spring to life. Hopefully its something simple.