Blew out hydraulic oil

[cmb97]

I was clearing some snow and noticed a bad leak so i loaded my Bobcat onto my trailer and brought it home It looks like I blew a hose My question is what do i need to do once the hose is replaced My hydraulics don't work at all now so i am thinking it was very low Can i get away with just adding oil into the machine

 

[skidsteer.ca]

fix leak, add oil, start and idle engine, make sure your charge pressure light is out, cycle loader up and down a few times, drive around a few minutes (don't do any work) then check the oil level, top up if needed.
Ken

 

[cmb97]

fix leak, add oil, start and idle engine, make sure your charge pressure light is out, cycle loader up and down a few times, drive around a few minutes (don't do any work) then check the oil level, top up if needed.
Ken

Thanks works good