any one need a new engine N844 OR N844T-TURBO

[heatpumpproducts]

Hi , guys I recently was looking for a new engine for my skid steer ,
low and behold , they are very pricey .
so I started to research , and found some . DEALERS WANT 7500.00 BEFORE INSTALL
I FOUND SOME FOR A HOLE LOT LESS.
these are the N844 & N844T -SHIBAURA (FORD) NEW HOLLAND 4 CYLINDER UNITS.
ONLY A FEW LEFT SO GET A HOLD OF ME .

 

[heatpumpproducts]

Oh I forgot to say these are NEW ENGINES not rebuilt .
and the dealer I talk to , his price was for rebuilt...not that they are bad , but
NEW IS NEW .

 

[heatpumpproducts]

Oh I forgot to say these are NEW ENGINES not rebuilt .
and the dealer I talk to , his price was for rebuilt...not that they are bad , but
NEW IS NEW .

i ordered my new engine today feb 10/09 for $ 4550.00us and $280.00us shipping from NewHolland ,PA.U.S.A. to Miramichi N.B.Canada .
i'll take some picks and tell you what i have done and will go through get it back up and going again .
turbo is a bit more than what i paid , but apple with apples . i wanted to make it as straight forward as posible .
i wanted to preserve to block so hand and chain blocked the machine onto my trailer by my self . ( a big winch on a trailer good idea ) don't try that if you have a bad heart .
she's ready for the garage , as soon as the engine arrives . and the engine is still in one piece
i mite have to try to move her under her own power at the garage to get her in thats why i did it the hard way. may want to rebuild the engine later as well , no recore required . and no re shipping the old one back.

 

[omega3]

would like to find new engine but my core is bad. 1997 lx665t

 

[heatpumpproducts]

would like to find new engine but my core is bad. 1997 lx665t

N84451hpnonturboengine.N84451hpnonturboengine.FantoFlywheel,Fuel&electrical.FantoFlywheel,Fuel&electrical.
$4,550$4,550WillfitNewNeHollandL565,HollandLX565,LS160LX565,&L160.&Case410CaseBSNWillfitwL565,LS160L160.410BSN
N844T59HPTurboengine.N844T59HPTurboengine.FantoFlywheel,Fuel&electrical.FantoFlywheel,Fuel&electrical.
$4,950$4,950WillfitNewNeHollandLX665,HollandLS170,L170,LS170,L175,C175.L175,Case420CaseBSNWillfitwLX665,L170,C175.420BSN
ADDITIONAL
$200
DISCOUNT
WITH
GOOD
CORE
HURRY
UP
-LIMITED
QUANTITY
WHILE
SUPPLY
LASTS

Foradditionalinformationcontact:
(800)-879-6507

good luck , kier

 

[80ja]

N84451hpnonturboengine.N84451hpnonturboengine.FantoFlywheel,Fuel&electrical.FantoFlywheel,Fuel&electrical.
$4,550$4,550WillfitNewNeHollandL565,HollandLX565,LS160LX565,&L160.&Case410CaseBSNWillfitwL565,LS160L160.410BSN
N844T59HPTurboengine.N844T59HPTurboengine.FantoFlywheel,Fuel&electrical.FantoFlywheel,Fuel&electrical.
$4,950$4,950WillfitNewNeHollandLX665,HollandLS170,L170,LS170,L175,C175.L175,Case420CaseBSNWillfitwLX665,L170,C175.420BSN
ADDITIONAL
$200
DISCOUNT
WITH
GOOD
CORE
HURRY
UP
-LIMITED
QUANTITY
WHILE
SUPPLY
LASTS

Foradditionalinformationcontact:
(800)-879-6507

good luck , kier

Do you still have this engine? I might be interested Thank you

 

[skidsteer.ca]

Do you still have this engine? I might be interested Thank you

HeatPump had bought one for his loader from these folks, but try the 800 #

 

[80ja]

HeatPump had bought one for his loader from these folks, but try the 800 #

He said no more, sold all of them, so I am still looking to rebuild mine or trade it Do you think? One guy said $1200 labor plus parts to rebuild mine with a 3 year warranty, Any good?

 

[mfyock]

He said no more, sold all of them, so I am still looking to rebuild mine or trade it Do you think? One guy said $1200 labor plus parts to rebuild mine with a 3 year warranty, Any good?

$1200 for the labor seams a little high since you are pulling the engine, but its probably worth it if he will stand behind the engine for 3 years. Those engines are a little fussy and can blow up pretty easy. I can sell you a set of new piston rings for $160, new from CNH they are over $300. Hopefully your bottom end is ok, or you will really get into some high $$. I imagine you will have 2-3k in the engine. I also have lots of other used parts if you need anything. It might have been cheaper for you to just sell your machine and buy another one.

 

[jerry]

$1200 for the labor seams a little high since you are pulling the engine, but its probably worth it if he will stand behind the engine for 3 years. Those engines are a little fussy and can blow up pretty easy. I can sell you a set of new piston rings for $160, new from CNH they are over $300. Hopefully your bottom end is ok, or you will really get into some high $$. I imagine you will have 2-3k in the engine. I also have lots of other used parts if you need anything. It might have been cheaper for you to just sell your machine and buy another one.

80ja, did you check out Ken's link in the other post for the rebuilders in North Dakota? They do list that engine and buy cores. Having rebuilt several gas engines, a complete job is a lot of labor and tools if you are doing a good job. Whatever, if you hire the rebuild done make sure you get a written warranty. Seen to many mistakes and overlooked things in rebuilt engines.

 

[lbrooks]

Do you have your Old engine ?? I need a precumbustion chamber out of the head?? !! HELP me Please

 

[lbrooks]

Do you have your Old engine ?? I need a precumbustion chamber out of the head?? !! HELP me Please

I am looing for a set rings and all the gaskets for rebuild on a n844t, also looking for a pre cumbustion chamber out of the head if you have one around. NH said they dont sell them

 

[mfyock]

I am looing for a set rings and all the gaskets for rebuild on a n844t, also looking for a pre cumbustion chamber out of the head if you have one around. NH said they dont sell them

Drop me an email at [email protected] and we can work out the details in private. I didnt really want to ruin a head for one chamber, but I might be willing. I have aftermarket piston rings available. The gaskets are available from NH, but I can get them for you to.

 

[soljrgriffin]

Hi , guys I recently was looking for a new engine for my skid steer ,
low and behold , they are very pricey .
so I started to research , and found some . DEALERS WANT 7500.00 BEFORE INSTALL
I FOUND SOME FOR A HOLE LOT LESS.
these are the N844 & N844T -SHIBAURA (FORD) NEW HOLLAND 4 CYLINDER UNITS.
ONLY A FEW LEFT SO GET A HOLD OF ME .

I know this is 15 years later... do you know where I can get a Shibaura N844 engine for my New Holland LX565 Skid Steer? Mine is without turbo.