Forums
New posts
Search forums
What's new
New posts
New media
New media comments
New profile posts
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Bobcat Skidsteer Forums
General Bobcat Skidsteer Forum
743 hydraulic controll valve
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support SkidSteer Forum:
Message
<blockquote data-quote="Tazza" data-source="post: 6319" data-attributes="member: 82"><p>Thats a neat idea! I'll do that when i get motivated and replace my seals.</p><p>As for the linkage, the bolt should not turn, it should be a flexible linkage though that allows it to self align but the part that bolts on to the throttle arm should be tight.</p><p>I agree, the oil will be leaking out the quad ring that seals between the body of the control block and the spool. Be very easy when re-installing the Quad ring, they are easy to catch on the sharp edges on the spool or the block that will damage the seal. Use lots of oil and be gentle, you will be fine!</p><p>As stated earlier, the only way to remove the spool is out the back, do not remove the bolt that holds the spring unless the spring was broken, the bolt is loctited it and must be heated, just warning you so you won't try and remove the spring and replace the seal with the spool in place still. I wish i could do it this way as mine leaks out the back only.</p></blockquote><p></p>
[QUOTE="Tazza, post: 6319, member: 82"] Thats a neat idea! I'll do that when i get motivated and replace my seals. As for the linkage, the bolt should not turn, it should be a flexible linkage though that allows it to self align but the part that bolts on to the throttle arm should be tight. I agree, the oil will be leaking out the quad ring that seals between the body of the control block and the spool. Be very easy when re-installing the Quad ring, they are easy to catch on the sharp edges on the spool or the block that will damage the seal. Use lots of oil and be gentle, you will be fine! As stated earlier, the only way to remove the spool is out the back, do not remove the bolt that holds the spring unless the spring was broken, the bolt is loctited it and must be heated, just warning you so you won't try and remove the spring and replace the seal with the spool in place still. I wish i could do it this way as mine leaks out the back only. [/QUOTE]
Verification
Post reply
Forums
Bobcat Skidsteer Forums
General Bobcat Skidsteer Forum
743 hydraulic controll valve
Top