Good evening folks! Just joined the forum, bin reading for a few months. Wifey bought me a used 543 last fall cause I was a good boy I guess. Plowed snow all winter started and ran fine. Started getting a whine when steering and lifting, figured it was me not letting the hydro oil warm up enough before using. Problem got worse, did some reading on the site, lost hydraulic oil level in tank, but didn't have any drips or puddles on the ground. Read some more, checked chain case levels, think I found the oil!Gushed out of the plug in the front. Now what I need is a manual which will give me an exploded view of the drive setup, I'm pretty sure I'm gonna end up with a seal gone on one of the drive motors. Would appreciate some help in finding the info source. Thanks.
Help Support SkidSteer Forum:
skidsteer.ca
Well-known member
- Joined
- Jan 20, 2006
- Messages
- 3,853
Usually seal kits for drive motors are not all that bad. You can get a price from your Bobcat dealer.
Another good place to try is www.loaderpartssource.com
Ken
Another good place to try is www.loaderpartssource.com
Ken
Thks skidsteer, just gotta wait for the parts
