02 863G HF Parking brake release

Help Support SkidSteer Forum:

RS Coyote

Well-known member
Joined
Apr 28, 2005
Messages
84
I have a 02 863G HF and the parking brake does not always release. I have to shut in down a few times and or rev it up before I can move her. When it does release I can usually feel the solenoid kick off when it does finally go. Can you guys give me any pointers on how to maybe fix it? Thank you.
 

StuZ

Well-known member
Joined
Nov 22, 2003
Messages
133
If you rock the hydro's does it release ?? If so the pin is bent under the solenoid, probably because the solenoid is weak, or a bad connection at some point in time.
 
OP
OP
R

RS Coyote

Well-known member
Joined
Apr 28, 2005
Messages
84
If you rock the hydro's does it release ?? If so the pin is bent under the solenoid, probably because the solenoid is weak, or a bad connection at some point in time.
Does this occur on level ground or unlevel ground? Both If you rock the hydro's does it release ?? NO
Most of the time if I shut down & start up again it will release. But it's getting worse. I take it I may need to replace the parking solenoid & I assume it's 12 volt?
 
Top