Recent content by jdrouillard

I have a T300 skid steer and have replace the drive motors multiple times now. The hydraulic system contains fine metal fragments that trash the units fairly quickly. Is there a way to purge the system to get rid of this? The most recent estimate to rebuild is about $7k, and we've already put...

I have the same problem on an 1845c. Both tilt cylinders rebuilt, but bucket quickly drops with engine running

I think the fan switch on mine has been disconnected, so perhaps that is the issue. Reading elsewhere it seems there are a number of things running off of the 8v circuit that could cause the fault code. I’ve not spent much time with it for a few weeks, but have trying to read the electrical...

Thanks for the input. I actually replaced the alternator several months ago, which apparently had a short, but no impact on the 08-21 code

Great. Thank you! I have read elsewhere that it could be due to other sensors that share the 8v circuit. I addressed the RHC issue, but am looking into the seat sensor too. The harnesses obviously can be challenging to trace.

I have an 864 track loader that is displaying a fault code of 08-21 (hyd temp sensor high range). It is displayed immediately after starting. I have changed the sensor at the base of the filter housing, but zero improvement. Any ideas on resolution would be appreciated