630 u-joints

Help Support SkidSteer Forum:

sterlclan

Well-known member
Joined
May 1, 2004
Messages
528
I was wondering if anyone had part numbers for these I would like to get them locally (NAPA) if possible the "local"dealer is over an hour and a half away and the local napa dosent have a listing for them Thanks in advance Jeff
 

Tazza

Moderator
Staff member
Joined
Dec 7, 2004
Messages
16,829
I bought the ones for my 743 after market, i will do my best to remember to check the numbers when i get home.
Have you got the old ones out at all? If i give you the numbers i have can they check the measurements of the numbers i give you against the ones you have? They should have spec sheets so they can check if the sizes match your samples.
If they are the same as mine, they look the same but there is a small difference on 2 of the mounting lugs.
 

Tazza

Moderator
Staff member
Joined
Dec 7, 2004
Messages
16,829
I bought the ones for my 743 after market, i will do my best to remember to check the numbers when i get home.
Have you got the old ones out at all? If i give you the numbers i have can they check the measurements of the numbers i give you against the ones you have? They should have spec sheets so they can check if the sizes match your samples.
If they are the same as mine, they look the same but there is a small difference on 2 of the mounting lugs.
The 2 U Joints my 743 runs are:
114-2116
114-2117 or RUJ-2046
They should be able to cross reference those two numbers.
I hope that helps.
 
OP
OP
sterlclan

sterlclan

Well-known member
Joined
May 1, 2004
Messages
528
The 2 U Joints my 743 runs are:
114-2116
114-2117 or RUJ-2046
They should be able to cross reference those two numbers.
I hope that helps.
Thanks and no they are still in they just started making noise wanted to have new ones here first could snow any time now would hate to have it ripped apart and need it thanks tazza Jeff
 

Tazza

Moderator
Staff member
Joined
Dec 7, 2004
Messages
16,829
Thanks and no they are still in they just started making noise wanted to have new ones here first could snow any time now would hate to have it ripped apart and need it thanks tazza Jeff
Got ya.
If you have a parts manual you can check the numbers against a 743. i can check if they are the same as listed for my 743. If they are correct the numbers for after market ones will be correct.
I will try and post the numbers from my manual, see who remembers.
 

Tazza

Moderator
Staff member
Joined
Dec 7, 2004
Messages
16,829
Got ya.
If you have a parts manual you can check the numbers against a 743. i can check if they are the same as listed for my 743. If they are correct the numbers for after market ones will be correct.
I will try and post the numbers from my manual, see who remembers.
Min are listed as:
6598303 - 114-2116
6598304 - 114-2117
I hope that helps.
 

Tazza

Moderator
Staff member
Joined
Dec 7, 2004
Messages
16,829
I dont yet have the parts manual am hoping to get one for christmas :) thanks Jeff
LOL, be nice and Santa may bring you one.
The other way is to call the local dealer and ask for a fax of the parts in that section. They are happy to do this to ensure you order the correct parts.
 
OP
OP
sterlclan

sterlclan

Well-known member
Joined
May 1, 2004
Messages
528
LOL, be nice and Santa may bring you one.
The other way is to call the local dealer and ask for a fax of the parts in that section. They are happy to do this to ensure you order the correct parts.
Unfortunately their schedule and mine dont agree and no saturday hours at all thanks for the help. Jeff
 

Latest posts

Top