Forums
New posts
Search forums
What's new
New posts
New media
New media comments
New profile posts
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Bobcat Skidsteer Forums
Bobcat Compact Track Loaders
T200 Vibration in steering sticks
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support SkidSteer Forum:
Message
<blockquote data-quote="7LBSSMALLIE" data-source="post: 80574" data-attributes="member: 6879"><p>so this is how I handle drive belt teninosers. and I do this every time I got one on the bench. A . place in vice, b. pb blaster. c turn vice handle to compress spring, note vice grip handy to keep it secure., sometimes you got to tap with hammer to get it to move. open and close a few times. wipe with never seize, {you are going to see the pivot pin work thru the the half moon] if its got divots or brgs have excessive play . suck it up and replace it . trick . most of the time they wont cam over from starting point. so when installed its a bitch. remedy is to preload while in vice cut the end off a zip strip, and place between pin and start point giving a slight pre load. install it put belt on if new belt ? bottom out teninsoer. 3 oclock plus. may have to apply down pressure and tap big gold cover with hammer to get it to cam over. LOCK IT DOWN DEAD head AGAINST BRAKE> belt is now stretched and should be in happy place</p></blockquote><p></p>
[QUOTE="7LBSSMALLIE, post: 80574, member: 6879"] so this is how I handle drive belt teninosers. and I do this every time I got one on the bench. A . place in vice, b. pb blaster. c turn vice handle to compress spring, note vice grip handy to keep it secure., sometimes you got to tap with hammer to get it to move. open and close a few times. wipe with never seize, {you are going to see the pivot pin work thru the the half moon] if its got divots or brgs have excessive play . suck it up and replace it . trick . most of the time they wont cam over from starting point. so when installed its a bitch. remedy is to preload while in vice cut the end off a zip strip, and place between pin and start point giving a slight pre load. install it put belt on if new belt ? bottom out teninsoer. 3 oclock plus. may have to apply down pressure and tap big gold cover with hammer to get it to cam over. LOCK IT DOWN DEAD head AGAINST BRAKE> belt is now stretched and should be in happy place [/QUOTE]
Verification
Post reply
Forums
Bobcat Skidsteer Forums
Bobcat Compact Track Loaders
T200 Vibration in steering sticks
Top