Forums
New posts
Search forums
What's new
New posts
New media
New media comments
New profile posts
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Bobcat Skidsteer Forums
Bobcat Compact Track Loaders
t190 hydraulics real slow and machine won't move like brakes still engaged..help!
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support SkidSteer Forum:
Message
<blockquote data-quote="7LBSSMALLIE" data-source="post: 78721" data-attributes="member: 6879"><p>I see eng drives a belno mention of codes, here.. I would have to suspect a drive motor puked, and sent shrapnel into sys. so to back up is drive belt intact this is how I would approach t/s A; down load codes and update software. B check drive belt C inspect case drain.FILTER. the fact that both drive and lift and tilt are giving grief> goes right back to drive belt this should be indacted by a low charge pressure code. slow lift and tilt? an loss of drive, if this is the case, lets get our head aroun how this sys works..eng drives a belt which in turn drives a shaft shaft turns lft stat right shaft gear pump on the end... with a charge pump between them.</p></blockquote><p></p>
[QUOTE="7LBSSMALLIE, post: 78721, member: 6879"] I see eng drives a belno mention of codes, here.. I would have to suspect a drive motor puked, and sent shrapnel into sys. so to back up is drive belt intact this is how I would approach t/s A; down load codes and update software. B check drive belt C inspect case drain.FILTER. the fact that both drive and lift and tilt are giving grief> goes right back to drive belt this should be indacted by a low charge pressure code. slow lift and tilt? an loss of drive, if this is the case, lets get our head aroun how this sys works..eng drives a belt which in turn drives a shaft shaft turns lft stat right shaft gear pump on the end... with a charge pump between them. [/QUOTE]
Verification
Post reply
Forums
Bobcat Skidsteer Forums
Bobcat Compact Track Loaders
t190 hydraulics real slow and machine won't move like brakes still engaged..help!
Top