Forums
New posts
Search forums
What's new
New posts
New media
New media comments
New profile posts
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Bobcat Skidsteer Forums
General Bobcat Skidsteer Forum
S250 Electrical problem
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support SkidSteer Forum:
Message
<blockquote data-quote="Fishfiles" data-source="post: 6855" data-attributes="member: 782"><p>Alot of the curcuits on that machine run on 6-8 volts not 12 volts , did you check the ground cable where it attaches to bellhousing under the starter , have seen that was the problem a few times , is the screen dim and hard to read as that is a classic tell tale of a bad ground , if not the ground I would think it's the controll panel which is about $650 as I changed one Friday past , I would also look at the big screw together wire connector under the back of the cab , have seen corrsion in that plug before ------------another starting problem I seen on that machine is if it has the auxillary wiring harness on top of the quick couples and the harness is plug in on top the battery and the wire gets smashed and shorts out on top the couplers it will stop you from starting but usually will give you the code of multiple key switch error which if I remember is a something like 64-48</p></blockquote><p></p>
[QUOTE="Fishfiles, post: 6855, member: 782"] Alot of the curcuits on that machine run on 6-8 volts not 12 volts , did you check the ground cable where it attaches to bellhousing under the starter , have seen that was the problem a few times , is the screen dim and hard to read as that is a classic tell tale of a bad ground , if not the ground I would think it's the controll panel which is about $650 as I changed one Friday past , I would also look at the big screw together wire connector under the back of the cab , have seen corrsion in that plug before ------------another starting problem I seen on that machine is if it has the auxillary wiring harness on top of the quick couples and the harness is plug in on top the battery and the wire gets smashed and shorts out on top the couplers it will stop you from starting but usually will give you the code of multiple key switch error which if I remember is a something like 64-48 [/QUOTE]
Verification
Post reply
Forums
Bobcat Skidsteer Forums
General Bobcat Skidsteer Forum
S250 Electrical problem
Top