Forums
New posts
Search forums
What's new
New posts
New media
New media comments
New profile posts
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Bobcat Skidsteer Forums
General Bobcat Skidsteer Forum
S130 Charging
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support SkidSteer Forum:
Message
<blockquote data-quote="Miker67" data-source="post: 66658" data-attributes="member: 5215"><p>Finally got around to digging into this more. I have been busy with other stuff so I haven't been able to get on this like I would have preffered.</p><p>The big red wire is going to the proper lug on the starter, key off at the starter and the alternator reads 11.56 volts (battery is low by now). The pair of wires in the plug key on has no voltage on either side.</p><p>The fuse panel fuse for the alternator has 12v both sides. </p><p>Honestly I don't think the problem has been just since the starter. I think the problem has been intermittent for some time now. At one point I tracked it back to a loose ground on the motor and fixed that and all seemed well for some time. I have since re-checked all grounds and all are good. </p><p> </p><p>This has me stumped. Any more thoughts? Were in the harness does the 12v from the panel come out at so I can start tracing back for chaffed or broken wires. </p><p> </p><p>Also still inop are the backup alarms and horn, which worked fine till a month ago. </p><p> </p><p>Could I have a computer that is starting to crap out on me?</p></blockquote><p></p>
[QUOTE="Miker67, post: 66658, member: 5215"] Finally got around to digging into this more. I have been busy with other stuff so I haven't been able to get on this like I would have preffered. The big red wire is going to the proper lug on the starter, key off at the starter and the alternator reads 11.56 volts (battery is low by now). The pair of wires in the plug key on has no voltage on either side. The fuse panel fuse for the alternator has 12v both sides. Honestly I don't think the problem has been just since the starter. I think the problem has been intermittent for some time now. At one point I tracked it back to a loose ground on the motor and fixed that and all seemed well for some time. I have since re-checked all grounds and all are good. This has me stumped. Any more thoughts? Were in the harness does the 12v from the panel come out at so I can start tracing back for chaffed or broken wires. Also still inop are the backup alarms and horn, which worked fine till a month ago. Could I have a computer that is starting to crap out on me? [/QUOTE]
Verification
Post reply
Forums
Bobcat Skidsteer Forums
General Bobcat Skidsteer Forum
S130 Charging
Top