Forums
New posts
Search forums
What's new
New posts
New media
New media comments
New profile posts
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Other Brand Skidsteer Forums
ASV / Terex Skidsteer Forum
Reply to post some hydraulic issues
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support SkidSteer Forum:
Message
<blockquote data-quote="roblarss" data-source="post: 70127" data-attributes="member: 9491"><p>Well finally got some good weather and checked out the loader. I swapped the hydraulic lines for the lift and tilt and the tilt goes fast now so I guess its in the control spool. Ill pull that apart in a few days hopefully. I have the machine indoors now and have been ripping it apart for some much needed maintenance. Found where the unknown hydraulic line goes. It goes to the filter up front by the cooler on the other side of the filter is a tee with a larger line that I cant follow yet (to much gunge still). The other line goes to a device labelled hydraforce. Looking at loader part source pictures it is possibly the charge relief loop. There are a couple of wires on the valve but they are cut off. I am lost on what is going on with the hose. Its currently capped off on the floor by the control spool I am thinking this line is a return. My current return from the control spool goes through the filter to the right of the seat. I am wondering both of these lines should be connected.</p></blockquote><p></p>
[QUOTE="roblarss, post: 70127, member: 9491"] Well finally got some good weather and checked out the loader. I swapped the hydraulic lines for the lift and tilt and the tilt goes fast now so I guess its in the control spool. Ill pull that apart in a few days hopefully. I have the machine indoors now and have been ripping it apart for some much needed maintenance. Found where the unknown hydraulic line goes. It goes to the filter up front by the cooler on the other side of the filter is a tee with a larger line that I cant follow yet (to much gunge still). The other line goes to a device labelled hydraforce. Looking at loader part source pictures it is possibly the charge relief loop. There are a couple of wires on the valve but they are cut off. I am lost on what is going on with the hose. Its currently capped off on the floor by the control spool I am thinking this line is a return. My current return from the control spool goes through the filter to the right of the seat. I am wondering both of these lines should be connected. [/QUOTE]
Verification
Post reply
Forums
Other Brand Skidsteer Forums
ASV / Terex Skidsteer Forum
Reply to post some hydraulic issues
Top