Forums
New posts
Search forums
What's new
New posts
New media
New media comments
New profile posts
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
General Skidsteer & Technical Topics
Shop Talk
Putting a Yanmar 4TNE86 in a Ford CL55
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support SkidSteer Forum:
Message
<blockquote data-quote="RJSStamps" data-source="post: 54367" data-attributes="member: 7242"><p>Tazza, Nice timing....I though sbout push pull settup about the time you posted it! Haven't found one with a big enough end for the lever though so I may have to ground the lever a bit, no biggy except removing the lever will be fun! And yes, the radiator hose will be tricky! The only way I see doing it is by using some sort of adapter between the two sizes. Never saw one for a vehicle going with that big a change in size. So, a trip to the parts store for heater hose and then to the plumbing section of Lowes for a couple 1 1/8th to 1 1/2 adapters. In a way this may help in the long run with the radiator setup. One major success today, I got the stuff lift hold pin in the ROPS freed today! 3 days of soaking with PB Blaster and 2 light taps of a hammer and it moves freely by hand now. I need some new zerk fittings all over the machine so I can grease things properly but everything is free moving now. That was the only pin that was really stuck though. RJS</p></blockquote><p></p>
[QUOTE="RJSStamps, post: 54367, member: 7242"] Tazza, Nice timing....I though sbout push pull settup about the time you posted it! Haven't found one with a big enough end for the lever though so I may have to ground the lever a bit, no biggy except removing the lever will be fun! And yes, the radiator hose will be tricky! The only way I see doing it is by using some sort of adapter between the two sizes. Never saw one for a vehicle going with that big a change in size. So, a trip to the parts store for heater hose and then to the plumbing section of Lowes for a couple 1 1/8th to 1 1/2 adapters. In a way this may help in the long run with the radiator setup. One major success today, I got the stuff lift hold pin in the ROPS freed today! 3 days of soaking with PB Blaster and 2 light taps of a hammer and it moves freely by hand now. I need some new zerk fittings all over the machine so I can grease things properly but everything is free moving now. That was the only pin that was really stuck though. RJS [/QUOTE]
Verification
Post reply
Forums
General Skidsteer & Technical Topics
Shop Talk
Putting a Yanmar 4TNE86 in a Ford CL55
Top