Forums
New posts
Search forums
What's new
New posts
New media
New media comments
New profile posts
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Bobcat Skidsteer Forums
General Bobcat Skidsteer Forum
No hydraulics
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support SkidSteer Forum:
Message
<blockquote data-quote="tomagregg" data-source="post: 77056" data-attributes="member: 3422"><p>Thanks. How much room do you have behind the seal before the drillbit would hit something else? I would like to go to Harborfreight but it and the bobcat dealer are 70 miles away. I ruined three of the mounting bolts on one motor by putting six-point socket on when I first tried to take the bolts out. It was dark in there and I just assumed they were standard bolts. Luckily I got them out with a 12 point socket. I'll have to get new ones with the rest of the parts. I can't get the bolts out of the other side with a 1/2 in Snapon impact wrench. They must be over torqued or something. Going to Napa to get a 12 point impact socket and an adapter for a three-quarter impact wrench. What is the best method for installing the seal? I would guess it's around 6 inches in diameter from edge to edge. Also there's a white seal on the hydraulic motor that's around 2 inches in diameter. I would assume that needs replacing also. Also there's a big O ring on the axle face that mates with the motor face. Does Bobcat sell a kit that has all of the seals in it? I've read I can use a W 46 hydraulic fluid, is that true. There is a tractor supply 25 miles from here that sells it for $37 a pale. Thanks, you're being a big help.</p></blockquote><p></p>
[QUOTE="tomagregg, post: 77056, member: 3422"] Thanks. How much room do you have behind the seal before the drillbit would hit something else? I would like to go to Harborfreight but it and the bobcat dealer are 70 miles away. I ruined three of the mounting bolts on one motor by putting six-point socket on when I first tried to take the bolts out. It was dark in there and I just assumed they were standard bolts. Luckily I got them out with a 12 point socket. I'll have to get new ones with the rest of the parts. I can't get the bolts out of the other side with a 1/2 in Snapon impact wrench. They must be over torqued or something. Going to Napa to get a 12 point impact socket and an adapter for a three-quarter impact wrench. What is the best method for installing the seal? I would guess it's around 6 inches in diameter from edge to edge. Also there's a white seal on the hydraulic motor that's around 2 inches in diameter. I would assume that needs replacing also. Also there's a big O ring on the axle face that mates with the motor face. Does Bobcat sell a kit that has all of the seals in it? I've read I can use a W 46 hydraulic fluid, is that true. There is a tractor supply 25 miles from here that sells it for $37 a pale. Thanks, you're being a big help. [/QUOTE]
Verification
Post reply
Forums
Bobcat Skidsteer Forums
General Bobcat Skidsteer Forum
No hydraulics
Top