Forums
New posts
Search forums
What's new
New posts
New media
New media comments
New profile posts
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Other Brand Skidsteer Forums
New Holland Skidsteer Forum
ls180 boom/tilt locked out
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support SkidSteer Forum:
Message
<blockquote data-quote="Mike10" data-source="post: 74351" data-attributes="member: 5461"><p>If you have power and ground, then you are only left with the instrument panel as the cause of the problem. If you have a friend with a LX or LS machine you could swap panels just to double check.......... One other check you might try is to disconnect the seat harness from the main harness. This is a square plug behind the seat. Once disconnected check the main harness seat connector and you should have power at one terminal. If you have power there then take a jumper wire and place one end on the terminal with power and touch the other end of the jumper wire to one of the other terminals of the main wire harness seat connector. If the dash lights do not come on, then move the jumper wire to the other terminal while the other end is still in contact with the terminal with the power. If the dash lights do not come on when jumping to either terminal, then you either have a wiring problem or the panel is defective. Since you already checked that you had power and ground to the panel, all that is left is the panel..............If the dash lights do come on, when jumping between terminals, then you have a problem with the seat and seat belt circuit.</p></blockquote><p></p>
[QUOTE="Mike10, post: 74351, member: 5461"] If you have power and ground, then you are only left with the instrument panel as the cause of the problem. If you have a friend with a LX or LS machine you could swap panels just to double check.......... One other check you might try is to disconnect the seat harness from the main harness. This is a square plug behind the seat. Once disconnected check the main harness seat connector and you should have power at one terminal. If you have power there then take a jumper wire and place one end on the terminal with power and touch the other end of the jumper wire to one of the other terminals of the main wire harness seat connector. If the dash lights do not come on, then move the jumper wire to the other terminal while the other end is still in contact with the terminal with the power. If the dash lights do not come on when jumping to either terminal, then you either have a wiring problem or the panel is defective. Since you already checked that you had power and ground to the panel, all that is left is the panel..............If the dash lights do come on, when jumping between terminals, then you have a problem with the seat and seat belt circuit. [/QUOTE]
Verification
Post reply
Forums
Other Brand Skidsteer Forums
New Holland Skidsteer Forum
ls180 boom/tilt locked out
Top