Forums
New posts
Search forums
What's new
New posts
New media
New media comments
New profile posts
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
General Skidsteer & Technical Topics
Shop Talk
hydraulic force
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support SkidSteer Forum:
Message
<blockquote data-quote="bludorbronc" data-source="post: 47187" data-attributes="member: 2047"><p>well, i went with a 4inch ram from surplus center, according to the chart ,almost 2 1/2 times force than my other cylinder had, worked great. now i want to know more about how my machine works. when using the auxillary hydraulics to operate the log splitter, does it put out full pressure at idle or does the pump put out pressure depending on rpm. is it the same for lifting the arms and tilting the bucket. does more rpm just give me more road speed. i mounted the log splitter in the bucket so that the splitter points out of the bucket straight out, that way i could angle the bucket down, that way i could roll the big logs into the splitter and save my back. now when the bucket is pointed all the way down the bucket wont tilt back up. if i put down force on the arms, hold foot to try to tilt bucket back up and back the machine up, i can force it to tilt up. it just needs a little help because it takes off with just a little effort. whats going on. thanks</p></blockquote><p></p>
[QUOTE="bludorbronc, post: 47187, member: 2047"] well, i went with a 4inch ram from surplus center, according to the chart ,almost 2 1/2 times force than my other cylinder had, worked great. now i want to know more about how my machine works. when using the auxillary hydraulics to operate the log splitter, does it put out full pressure at idle or does the pump put out pressure depending on rpm. is it the same for lifting the arms and tilting the bucket. does more rpm just give me more road speed. i mounted the log splitter in the bucket so that the splitter points out of the bucket straight out, that way i could angle the bucket down, that way i could roll the big logs into the splitter and save my back. now when the bucket is pointed all the way down the bucket wont tilt back up. if i put down force on the arms, hold foot to try to tilt bucket back up and back the machine up, i can force it to tilt up. it just needs a little help because it takes off with just a little effort. whats going on. thanks [/QUOTE]
Verification
Post reply
Forums
General Skidsteer & Technical Topics
Shop Talk
hydraulic force
Top