Forums
New posts
Search forums
What's new
New posts
New media
New media comments
New profile posts
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Other Brand Skidsteer Forums
ASV / Terex Skidsteer Forum
Hydraulic cooler blew out
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support SkidSteer Forum:
Message
<blockquote data-quote="roblarss" data-source="post: 73148" data-attributes="member: 9491"><p>Got the newly built tank installed and working. I have a pressure gauge where the temp sending unit was. This is on the outlet so not as ideal as I would like. It shows 40psi when cold (-10C) and then once the oil warms up then it drops to about 15psi. This seems alittle high to me for the return side of the cooler. I removed the oil reservoir cap to see if it was maybe a vent issue but no difference. Im not sure if this is really too high... I did notice the reservoir cap looks like a pressure cap and has 20 psi written on it. So its possible the tank is supposed to be under pressure slightly. I have been using the loader for about an hour and it all seems to work fine.</p></blockquote><p></p>
[QUOTE="roblarss, post: 73148, member: 9491"] Got the newly built tank installed and working. I have a pressure gauge where the temp sending unit was. This is on the outlet so not as ideal as I would like. It shows 40psi when cold (-10C) and then once the oil warms up then it drops to about 15psi. This seems alittle high to me for the return side of the cooler. I removed the oil reservoir cap to see if it was maybe a vent issue but no difference. Im not sure if this is really too high... I did notice the reservoir cap looks like a pressure cap and has 20 psi written on it. So its possible the tank is supposed to be under pressure slightly. I have been using the loader for about an hour and it all seems to work fine. [/QUOTE]
Verification
Post reply
Forums
Other Brand Skidsteer Forums
ASV / Terex Skidsteer Forum
Hydraulic cooler blew out
Top