Forums
New posts
Search forums
What's new
New posts
New media
New media comments
New profile posts
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Bobcat Skidsteer Forums
General Bobcat Skidsteer Forum
Bobcat fuel line problem
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support SkidSteer Forum:
Message
<blockquote data-quote="Fishfiles" data-source="post: 6561" data-attributes="member: 782"><p>Pull the pick up tube out the tank , it is pretty hard to do on a 863 , espescally if you never done it before , it's between the motor and the pump, it is held in with a rubber grommet and has a 90 degree fitting that pushes in to the grommet , , the old style tube was clear tubing like aquarium tubing and had a screen wth a check in it , the new style is hard plastic no screen , if you bought the machine used or it had been worked on before for the pickup tube , it is possibe that the old tube which falls off in the botom of the tank has discinergrated into little pieces which sometimes gets stuck in the 90 degree fitting , have also seen on some s/n breaks of the 863 where the fuel line is run under the engine and the motor mount rubbers get weak and pinch the hose , but you seem to have the pick up tube senerio</p></blockquote><p></p>
[QUOTE="Fishfiles, post: 6561, member: 782"] Pull the pick up tube out the tank , it is pretty hard to do on a 863 , espescally if you never done it before , it's between the motor and the pump, it is held in with a rubber grommet and has a 90 degree fitting that pushes in to the grommet , , the old style tube was clear tubing like aquarium tubing and had a screen wth a check in it , the new style is hard plastic no screen , if you bought the machine used or it had been worked on before for the pickup tube , it is possibe that the old tube which falls off in the botom of the tank has discinergrated into little pieces which sometimes gets stuck in the 90 degree fitting , have also seen on some s/n breaks of the 863 where the fuel line is run under the engine and the motor mount rubbers get weak and pinch the hose , but you seem to have the pick up tube senerio [/QUOTE]
Verification
Post reply
Forums
Bobcat Skidsteer Forums
General Bobcat Skidsteer Forum
Bobcat fuel line problem
Top