Forums
New posts
Search forums
What's new
New posts
New media
New media comments
New profile posts
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Bobcat Skidsteer Forums
General Bobcat Skidsteer Forum
Bobcat 773G Turbo Overheating
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support SkidSteer Forum:
Message
<blockquote data-quote="skidsteer.ca" data-source="post: 25741" data-attributes="member: 307"><p>Mine the temp guage is cafuey, have change the sensor, computer and the guage panel and still, after a couple hours the guage will begin to float up and down, ( it moves too fast to be warming and cool of that much that quick, say every 10 seconds) often getting to the yellow, and ocasionally to the red, causing a shutdown. I have installed a standard guage in the machine and the temp is rock steady on the new guage.</p><p>I would install a separate guage to see if you really have a temp problem or just a guage problem. So far the only cure for mine has been to unplug the sender in the summer months and pull the glow plug relay (glow plugs cycle 30 seconds if there is no signal from the temp sender.</p><p>If you have any sugestions I'm all ears.</p><p>Sometime the spring loaded fan belt tensioner becomes frozen and the belt gets loose and slips at higher rpm resulting in a slow fan speed and over heat. The air coming out the two side vents should almost blow your hat off if flowing properly.</p><p>Ken</p></blockquote><p></p>
[QUOTE="skidsteer.ca, post: 25741, member: 307"] Mine the temp guage is cafuey, have change the sensor, computer and the guage panel and still, after a couple hours the guage will begin to float up and down, ( it moves too fast to be warming and cool of that much that quick, say every 10 seconds) often getting to the yellow, and ocasionally to the red, causing a shutdown. I have installed a standard guage in the machine and the temp is rock steady on the new guage. I would install a separate guage to see if you really have a temp problem or just a guage problem. So far the only cure for mine has been to unplug the sender in the summer months and pull the glow plug relay (glow plugs cycle 30 seconds if there is no signal from the temp sender. If you have any sugestions I'm all ears. Sometime the spring loaded fan belt tensioner becomes frozen and the belt gets loose and slips at higher rpm resulting in a slow fan speed and over heat. The air coming out the two side vents should almost blow your hat off if flowing properly. Ken [/QUOTE]
Verification
Post reply
Forums
Bobcat Skidsteer Forums
General Bobcat Skidsteer Forum
Bobcat 773G Turbo Overheating
Top