Forums
New posts
Search forums
What's new
New posts
New media
New media comments
New profile posts
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Bobcat Skidsteer Forums
General Bobcat Skidsteer Forum
A300 two-speed issue
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support SkidSteer Forum:
Message
<blockquote data-quote="brdgbldr" data-source="post: 126636" data-attributes="member: 7474"><p>This is what the error code is: Right Can Joystick X-axis Not In Neutral.</p><p></p><p>Not sure why the machine would cut off and jerk to the right since that would be a problem with the left joystick. That sounds like the the left joystick is stuck in the forward right position. So your problem could be with the left joystick. You could try a "HYDROSTATIC PUMP CALIBRATION", this is for the left joystick, which involves putting the machine on jackstands. The procedure is pretty long so I hope you have a service manual if this is what you need to do.</p><p></p><p>I'm not sure if this will help or not but you can try doing a lift and tilt calibration. This is for the right joystick.</p><p>With the seat bar down and cab door closed, move the right joystick forward and to the right, hold it there. Turn the key to the run position or press the RUN/ENTER button for power without stating the machine. On the left panel press the PRESS TO OPERATE button. You should hear the actuators moving. Release the joystick. You should hear an error alarm. The codes should be: 38-10 ACTUATOR CALIBRATION PERFORMED and I think code 32-24 ACS CONTROLLER CALIBRATION PERFORMED.</p><p></p><p>Here is a video that is on a different machine but the same lift tilt calibration procedure:</p><p>[MEDIA=youtube]qYtPGL9ONok[/MEDIA]</p></blockquote><p></p>
[QUOTE="brdgbldr, post: 126636, member: 7474"] This is what the error code is: Right Can Joystick X-axis Not In Neutral. Not sure why the machine would cut off and jerk to the right since that would be a problem with the left joystick. That sounds like the the left joystick is stuck in the forward right position. So your problem could be with the left joystick. You could try a ”HYDROSTATIC PUMP CALIBRATION”, this is for the left joystick, which involves putting the machine on jackstands. The procedure is pretty long so I hope you have a service manual if this is what you need to do. I’m not sure if this will help or not but you can try doing a lift and tilt calibration. This is for the right joystick. With the seat bar down and cab door closed, move the right joystick forward and to the right, hold it there. Turn the key to the run position or press the RUN/ENTER button for power without stating the machine. On the left panel press the PRESS TO OPERATE button. You should hear the actuators moving. Release the joystick. You should hear an error alarm. The codes should be: 38-10 ACTUATOR CALIBRATION PERFORMED and I think code 32-24 ACS CONTROLLER CALIBRATION PERFORMED. Here is a video that is on a different machine but the same lift tilt calibration procedure: [MEDIA=youtube]qYtPGL9ONok[/MEDIA] [/QUOTE]
Verification
Post reply
Forums
Bobcat Skidsteer Forums
General Bobcat Skidsteer Forum
A300 two-speed issue
Top